![](https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhnBg1YgsYCAYM0uqsRITn-X2KhmBqN5sIj0T7T8VOe7v-uq-3s-4X-kkVAUOTe0G-6WpDbqSnsjX3sMXEgszatR_dCSJ6yPjD9vuKwNG89W0GXaE35ZVRtleWoyFFMOn_jpDjjlyu44OI/s320/inside+of+heat+pump.jpg)
When you start shopping for a heat pump, there are a few things you need to look for. First, manufacturers rate the efficiency of most heat pumps in two ways: SEER and HSFP ratings. Higher SEER and HSFP ratings indicate a more efficient unit.
•SEER stands for seasonal energy efficiency rating, and is a ratio of how much energy (measured in BTUs) is pumped outside in cooling mode divided by the electricity used (in watts) for cooling. Look for a SEER rating between 14 and 18.
•HSFP stands for heating seasonal performance factor. It calculates the ratio of energy pumped indoors for heating to energy used for heating, but it's a more complicated equation than the SEER rating because it also takes into account supplemental heating needs and the energy used to defrost the unit. Look for an HSFP rating between 8 and 10.
Heat pumps often feature options that make them more efficient. These include:
•A desuperheater coil that heats water by recycling waste heat (or on an RCC system, a refrigerant heat reclaimer that also uses the pump's extra capacity to heat water during mild winter weather).
•Dual-mode compressors and motors that save energy by adjusting up or down according to the level of heating or cooling needed.
•Scroll compressors that are quieter, more efficient and last longer than traditional compressors.
Though many of these features can only be found on more expensive heat pumps, they make up for the initial expense by helping heat pumps work more efficiently and save more energy throughout the pump's life.
Our goal is to help educate our customers about energy and home comfort issues (specific to HVAC systems).For more information about Indoor Air Quality and other HVAC topics,click here to visit our website
No comments:
Post a Comment