St.Augustine

St.Augustine
The sun shines brightest after a storm.

Saturday, April 30, 2011

Got a Pool? Heat it the Smart Way

Pool owners know how expensive it can be to keep their pool water at a comfortable temperature. The good news is, there’s a smart, efficient way to do it that won’t force you to shorten your swimming season, or tax your energy budget. Most homeowners who have heat pumps use them to economically heat and cool their homes. But a heat pump can also heat water by using heat from the air around the unit and transferring it to the water in your pool.

Heat pump water heaters use electricity to move heat from one place to another instead of generating heat directly. They operate by recovering heat from the atmosphere instead of using fuel to create it. Therefore, they can be 2-3 times more energy efficient than conventional electric resistance water heaters. And, there’s no need to store fossil fuels on your property.

Since it holds substantial amounts of heat, sun-warmed air is the energy source used for this type of water heater. The pool heat pump recycles heat energy that already exists in the air around us. Transferring heat is much less expensive than burning a fuel for heat.

Here’s how it works:


1.A large quantity of warm air is drawn across the air coil by a high-efficiency motor and fan blade.

2.Cold liquid R-410A refrigerant inside the air coil absorbs heat from warm air and changes to a warm gas.

3.Warm gas is compressed by a new high efficiency scroll compressor. The R-410A is now a hot gas.

4.Hot gas moves through the outer casing of the water coil, releasing heat to the cooler pool & spa water passing through the inner casing of the water coil.

5.The R-410A condenses back to a liquid, then the process repeats itself over and over until your pool or spa is up to your desired temperature.

These units are quiet and energy-efficient, and better yet, they don’t require vents, flues, or expensive piping, allowing for installation almost anywhere. We believe that this type of heat pump is the most economical way to heat your pool in Southwest Florida, so check out your options.

If you want to learn more about how to efficiently heat your pool water, contact us. We’ll provide you with a free, no obligation analysis that includes sizing, operational cost and an objective comparison to fossil fuel and solar. We can also calculate your return on investment. So, if you have a pool, heat it the smart way! We can show you how.

Friday, April 29, 2011

Get to Know your Air Conditioner

It’s air conditioning season, and by now you’ve probably had your checkup done, you’ve got your A/C unit cranked up, and it’s keeping you cool and dry during these hot, humid summer days. You’re probably not thinking much about how it works, what the parts do, and how they work together to keep you comfortable. Of course, here at Action Air, we think you should know as much as possible about your HVAC system so that you can keep it operating smoothly and efficiently. So in the next couple of posts I’d like to go over the basics of air conditioning and heat pump cooling.


Most people think that air conditioners lower the temperature in their homes simply by pumping cool air in. What’s really happening is that the warm air from your house is being circulated through the air handler and cycled back in as cooler air. This cycle continues until your thermostat reaches the desired temperature.

Air conditioners work in the same way as refrigerators. Of course, instead of cooling just a small space, an air conditioning system cools a whole house; but the principle is the same. Air conditioners use chemicals, or refrigerants, that convert from a gas to a liquid and back again. This chemical is used to transfer heat from the air inside of a home to the outside air.

The unit has three main parts– a compressor, a condenser and an evaporator. The compressor and condenser are usually on the portion of the air conditioner that is located outside the home. The evaporator is located on the inside the house, often as part of your heating unit.

The evaporative cycle is the action that produces cool air in your home:

1.The compressor compresses cool refrigerant gas, causing it to become hot, high-pressure gas.

2.This hot gas runs through a set of coils so it can dissipate its heat, and it condenses into a liquid.

3.The refrigerant liquid runs through an expansion valve, and in the process it evaporates to become cold, low-pressure gas.

4.This cold gas runs through a set of coils that allow the gas to absorb heat and cool down the air inside the building.

In order to circulate the cool air throughout your home and remove hot air, a fan on the evaporator blows air inside the house across the evaporator fins. The return grille and ductwork take the hot air through the ducts and into the evaporator. The hot air is actually used to expand the gas in the evaporator. As the heat is removed from the air, the air and coil are cooled. It is then blown into the house through supply ducts.

This continues over and over until the room reaches the temperature you set your thermostat to. When that happens, the thermostat senses that the temperature has reached the right setting and turns off the air conditioner. As the room warms up, the thermostat turns the air conditioner back on until the room reaches the desired temperature.

This is the basic process by which air conditioners work.

Next time, we’ll talk about how a heat pump cools your home.



Our goal is to help educate our customers about energy and home comfort issues (specific to HVAC systems).For more information about Indoor Air Quality and other HVAC topics,click here to visit our website

Sunday, April 24, 2011

Maintaining your Air Handler

We’ve discussed the air handler and its function as part of your HVAC system. Now, let’s talk about some aspects of maintenance for this important system component. Professional service is highly recommended, as this is a pretty technical piece of equipment. We can come out as part of scheduled maintenance visits to check your air handler.

Spring maintenance checks can help you avoid costly A/C repairs when the heat of summer arrives. Air handling units have high voltage running into them and there is a shock hazard. So, remember that only an HVAC professional should work on the air handler unit.

Inside the unit are the evaporator, metering device (on most units), the blower motor, and some electro-mechanical controls for HVAC control. The metering device and the electro-mechanical controls should be checked by an HVAC professional to ensure that they are clean and functioning properly.

A big problem people encounter with the evaporator coils is blocked coils. Usually, this means that the coils are plugged with dust, dirt, and other debris. For the evaporator to work properly and efficiently, the coils must be clean and have a measured amount of air flow.

This is one reason that a good filter is necessary, in order to filter all the particles from the air before it reaches the coils. If the air is not filtered, then there will be a build-up over time of dust and debris that get sucked into the return. This build-up clogs the evaporator coil and can actually cause the coil to ice up. The air handling unit becomes less and less efficient and will eventually fail to cool or heat the home. Air handling units need basic preventive maintenance to prevent premature breakdowns and to keep them operating at peak efficiency.

Cleaning the coils is also an important part of air handler maintenance. Coils operate below the dew point when the air conditioner or heat pump cooling cycle is on. This will make the evaporator coil wet, so when the dust makes contact with the coil it will often stick to it. Over time this will cause a build up and eventually the HVAC system will stop cooling. With improper flow across the evaporator coils there is no heat exchange process. The coils will freeze and ice will form on them. Another cause of ice forming on the evaporator coil is a low refrigerant charge. If the evaporator coils are clean and they are icing up, you need to call an HVAC professional to check the refrigerant charge.

Typically the only required HVAC maintenance on the blower is oiling the air handler blower motor if it has oil ports, or checking the belt if you have a belt driven motor. Not all blower motors have oil ports. These blower motors use sealed bearings and never require oil. The air handler blower motors that do have oil ports usually have little plastic dust caps that can be removed so that oil can be applied.

Clean coils, a working motor, proper filters and refrigerant levels and good air flow are essential elements for the efficient operation of your air handler. If you suspect that your air handler isn’t doing its job, let us know. With regular maintenance, you can get the best performance out of this critical piece of HVAC equipment.

Our goal is to help educate our customers about energy and home comfort issues (specific to HVAC systems).For more information about Indoor Air Quality and other HVAC topics,click here to visit our website

What is an Air Handler?

Your heating and cooling system is made up of many parts, all working together to keep you comfortable all year round. I’d like to talk about some of the components of your HVAC system—what they are and how they work. After all, the more you know about your system equipment, the better.


Let’s start with the air handler. An air handler is usually located in the garage, a closet, or in the attic (unless you have a package unit then the air handler is incorporated in the system). It is essential to any HVAC forced air system. All A/C units need a way to move the air, and the air handler serves this function. It houses the evaporator coils, the blower motor, and some HVAC controls. It can be an up flow, down flow, or horizontal flow AHU (air handling unit).





Knowing this information can help you find the filter if you have never changed the filter in this air handling unit. Some air handling units have the filter inside. If there is no filter in the return register or grill then the filter is either in the return duct or in the unit itself. Filtering the air is not only important for the indoor air quality in your home but it is essential for the proper operation of the air handling unit itself.

The evaporator coil carries refrigerant inside it. This coil and refrigerant, through the heat exchange process, absorbs heat from the air passing through the coils inside the air handler. The heat causes the refrigerant inside the evaporator coils to boil and change state. The refrigerant, where it enters the coil, is mostly a liquid. By the time it reaches the end of the coils it should have absorbed enough heat to change it from a liquid to a vapor. On the outside of the unit there are two copper lines. The large line is the suction line. This line carries the vapor (refrigerant) back to the compressor in the condensing unit. The small line is called a liquid line. This line carries liquid (refrigerant) from the condensing unit coils to the evaporator. When the unit is running the liquid line should be hot and suction line should be cold (unless it is a heat pump in the heating mode). The temperatures of these lines will vary depending on how hot the house is inside and the ambient temperature outside the home.

The blower is comprised of different components in most units. It has an electric motor, a blower wheel, and a cage typically referred to as a squirrel cage. Some air handling units have belt driven motors and most have capacitors for the air handler electric motor.

Your air handler is a vital piece of HVAC equipment. Next time, we’ll talk about how to maintain your air handler to keep it and your system operating efficiently.

Our goal is to help educate our customers about energy and home comfort issues (specific to HVAC systems).For more information about Indoor Air Quality and other HVAC topics,click here to visit our website

Friday, April 22, 2011

Are Your Air Conditioning Ducts Costing You Money?

As a Florida homeowner, you know how much you rely on your A/C unit and heat pump. You need them to keep you comfortable all year long, even in extreme heat or cold. But, is your forced-air system working too hard for your comfort? One way to tell is to inspect your ductwork. Leaky air ducts could be causing a lot of issues in your home, and worse yet, they could be costing you money. Ductwork that’s improperly sealed or torn allows about 20% of the air going through it to escape. As a result, your system has to work harder and use more fuel to keep you comfortable. Which leads to- you guessed it- higher energy bills. It also shortens the life span of your heating and cooling equipment.

There are several clues that indicate improperly sealed ducts:

■Energy bills that seem too high

■Areas that are hard to heat or cool

■Stuffy or dusty rooms

■Tangled or kinked ducts

■Uninsulated ducts in the garage or attic


Do any of these issues sound familiar? If so, you need to check your ducts and make sure they’re performing well. We do a lot of ductwork inspection and repair, and we know how important it is that they’re in good shape. So, make sure maintenance includes the following steps:

1. Do a thorough inspection of all ducts. Don’t forget ductwork in the attic and garage.

2. Use mastic, metal tape or an approved sealant to seal up any leaks or poor connections. Duct tape is not recommended as it’s not durable for this application.
3. Seal ductwork to all registers and air returns.

4. Insulate around ducts in the garage and attic with R-6 insulation.

Keeping your home comfortable requires ducts that are clean, free from obstructions and sealed properly. Taking these steps will improve your home’s energy efficiency, keep indoor air clean and save you up to 20% off your energy bill. It doesn’t take much time or effort to keep your ducts in good working order and the payoff could be big, so do yourself and your system a favor– keep your ducts happy with regular inspections.


Our goal is to help educate our customers about energy and home comfort issues (specific to HVAC systems).For more information about Indoor Air Quality and other HVAC topics,click here to visit our website

Thursday, April 21, 2011

Air Conditioning Maintenance- Don’t Neglect It!

This is a topic we can’t talk about enough. Here at Action Air, we believe that regular maintenance is one of the most important factors in your home comfort. All of the other measures you take to reduce energy use and increase comfort won’t be effective if your AC is not working properly. Maintenance ensures that your cooling system keeps you comfortable, works at peak efficiency, lasts longer and costs you less money in repairs.
So, let’s go over some of the basics of AC maintenance for Florida homeowners:

Filters

One of the most important maintenance task that will ensure the efficiency of your air conditioner is to routinely replace or clean its filters. Clogged, dirty filters block normal air flow and reduce a system’s efficiency significantly. With normal air flow obstructed, air that bypasses the filter may carry dirt directly into the evaporator coil and impair the coil’s heat-absorbing capacity. Keeping the filter clean can lower your air conditioner’s energy consumption by 5%–15%.

For central air conditioners, filters are generally located somewhere along the return duct’s length. Common filter locations are in walls, ceilings, air handler, or in the air conditioner itself.

Some types of filters are reusable; others must be replaced. They’re available in a variety of types and efficiencies. We can tell you which kinds of filters are right for your system, and clean or replace your air conditioning system’s filter or filters during regularly scheduled maintenance visits. You can do the job every month or two during the cooling season, as well. Filters may need more frequent attention if the air conditioner is in constant use, is subjected to dusty conditions, or you have fur-bearing pets in the house.

Coils

The air conditioner’s evaporator coil and condenser coil collect dirt over their months and years of service. A clean filter prevents the evaporator coil from soiling quickly. In time, however, the evaporator coil will still collect dirt. This dirt reduces air flow and insulates the coil, reducing its ability to absorb heat. To avoid this problem, check your evaporator coil every year and clean it as necessary.

Outdoor condenser coils can also become very dirty if the outdoor environment is dusty or if there is foliage nearby. You can easily see the condenser coil and notice if dirt is collecting on its fins.

You should minimize dirt and debris near the condenser unit. Your dryer vents, falling leaves, and lawn mower are all potential sources of dirt and debris. Cleaning the area around the coil, removing any debris, and trimming foliage back at least 18 inches to 2 feet to allow for adequate air flow around the condenser.

Fins

The aluminum fins on evaporator and condenser coils are easily bent and can block air flow through the coil. Air conditioning wholesalers sell a tool called a “fin comb” that will comb these fins back into nearly original condition. We can also take care of this during preventative maintenance.

Condensate drains

Clogged drain channels prevent your cooling unit from reducing humidity, and the resulting excess moisture may discolor walls or carpet. Routine cleaning with a shop vac and approved drain cleaning additive is very worthwhile.

Regular AC maintenance is worth the extra few minutes it takes each month to make sure these important components are working properly. Another smart idea? Sign up for a maintenance contract. Our highly-trained technicians can be your AC system’s best friend!

Our goal is to help educate our customers about energy and home comfort issues (specific to HVAC systems).For more information about Indoor Air Quality and other HVAC topics,click here to visit our website

Wednesday, April 20, 2011

What Makes HEPA Air Filters Different?

The average Northeast Florida home’s indoor air quality is 10 times more polluted than the outdoor air, which is consistent with national trends in indoor pollution. Indoor air can become “bottled up,” especially in homes that are sealed tightly to maximize energy efficiency, as it isn’t exchanged as often. These are a few reasons why indoor air filters are so important to your health and the integrity of your equipment. Different filtration methods are available. HEPA air filters are one of the most popular options, because of their ability to capture more than 99.95 percent of particles.
HEPA stands for High Efficiency Particulate Arrestance. HEPA filters are generally capable of capturing particles as small as 0.3 microns, which is smaller than the human eye can see. Originally developed for military and biomechanical use, they are currently some of the most efficient residential air filters on the market. HEPA filters can remove:

■Dust

■Dust mites

■Pollen

■Mold spores

■Various allergens

■Pet dander

HEPA filter fibers are usually made of fiberglass and are arranged haphazardly, very close to one another to create a dense “mat.” The material has many more pleats per inch than in standard filters. Another way they differ from standard air filters in that they do not merely function like a “sieve,” but rely on air movement to trap particles in three different ways:

■Interception, in which particles become stuck to fibers

■Impaction, in which particles get stuck in the weave

■Diffusion, where the most minuscule particles collide with gas molecules, slowing down their process and making them more likely to be trapped by interception or impaction.

HEPA filters are not the only option out there. Some homeowners find that HEPA filters can make their systems work too hard pull air through the filter, so check with the technician the next time you’re due for preventive maintenance to find out the right filter for your system.

Our goal is to help educate our customers about energy and home comfort issues (specific to HVAC systems).For more information about Indoor Air Quality and other HVAC topics,click here to visit our website.