St.Augustine

St.Augustine
The sun shines brightest after a storm.

Tuesday, April 19, 2011

Repair or Replace Dilemma? Facts about Your A/C’s Lifespan

Do you have a room or addition to your Northeast Florida home that never gets as cool as it should? Do you have a huge, window air conditioner that is noisy and blocks the view? Is the upstairs of your home difficult to cool? An answer to all those problems can come from installing ductless mini-split air conditioning.

Ductless mini splits have been gaining in popularity. They have been in use for years in Japan, where land and outside space is limited for large heat pumps or central-air units. Mini splits are compact, efficient and do not use ducts to deliver cool air.
Ductless mini splits consist of two components: an inside air-handling unit and a compact outdoor compressor and condenser. The interior part is generally mounted on a wall where it will generate the best cooling. The outside section can be placed up to 50 feet away from the inside section. The two components are connected by a simple 3-inch opening through the wall.

The ductless mini-split air conditioning system is sized for the area to be cooled. Smaller spaces will require fewer BTU’s than larger areas. Sizing the unit assures the best efficiency by not using more power than is needed.

They offer great flexibility in adapting to different room and home situations. Some systems are capable of using only one outside component to handle up to four inside units which can be run independently with their own thermostat. Other options include units which can be ceiling or wall-mounted, and floor models are also available.

If you would like an different option to the noise of a window unit or you have rooms that are never cool enough, contact us at Action Air. We can give you all the details on this great cooling system.

Monday, April 18, 2011

Trying to Get Air to a New Space? Ductless Options Can Help

Additions to your home can be difficult to heat and cool. Spaces with hydronic systems, radiant panels, or a bonus room over a garage, can also prove tricky. Ductless heating and cooling is a good option to get airflow to spaces like this. Maybe your existing system does not accommodate certain rooms or additions, or maybe it’s just not possible to install ducts where you need them. In these circumstances, ductless heating and cooling is versatile and practical.
Ductless heating and cooling systems are called mini-splits. Their biggest advantage is their small size, which allows them to heat or cool specific zones. You can purchase a single unit, or a model that has as many as four units that allows you to heat or cool four different zones. Each zone has its own thermostat, so you can adjust each as needed or keep them off if no one is using the space. This makes for great savings because you aren’t using energy you don’t need.

Mini-splits are easy to install. They consist of two units, an indoor air-handler and an outdoor compressor/condenser. The two are linked by a conduit through the wall, which in some models can be up to 50 feet long, giving you a great deal of space to place your units where you need them.

Another advantage of ductless heating and cooling systems is that they can be installed any place a small, 3-inch hole can be made in the wall. They can even be hung in the corner near the ceiling. Most models run very quietly, and many even operate by remote and filter the air as they heat or cool it.

Most mini-split systems are either a heat pump or an air conditioner model. Heat pumps are a good choice for climates that experience both warm and cool weather, since they have the ability to pump heat both into and out of a small space. Mini-split air conditioners work well for consistently warmer temperatures like ours.

Call Action Air to discuss which ductless option is right for you! We’re happy to help!

Sunday, April 17, 2011

Programmable Thermostat Features You’ll Like (Hint: They Go Way Beyond Temperature Settings)

Programmable thermostats offer many features that go beyond temperature control to offer convenience, comfort and more. One impressive feature is energy savings. According to the U.S. Department of Energy, using the right thermostat and programming it correctly could save you up to $180 a year!

Various models offer different features which complement weekly schedules. There are three common models:

■7 day models are the most flexible, allowing you to program different settings for morning, afternoon, evening and night for each day of the week.

■5+ 2 day models are a good choice for people keeping one schedule Monday-Friday, and another on Saturday and Sunday.

■5-1-1 day models have three programmable “slots,” one for the work week, a second for Saturdays, and a third for Sundays.

Remote access allows for zone temperature control. Sensors are placed in individual rooms or zones throughout the house, and connected to the main unit. If you want your bedroom warm in the morning, you can set the temperature to rise when you wake up in that specific location. You can also keep children’s rooms from becoming too cold without giving the children access to the controls. Some remote access models even allow you to adjust settings by phone or internet before you get home.

Programmable thermostats make keeping comfortable convenient. Action Air will be glad to help you decide which features suit your lifestyle to offer the maximum control, versatility and energy savings!


Our goal is to help educate our customers about energy and home comfort issues (specific to HVAC systems).For more information about Indoor Air Quality and other HVAC topics,click here to visit our website.

Saturday, April 16, 2011

Federal Tax Credits Still On For Energy Efficient Systems

Lots of homeowners took advantage of the generous federal tax credits offered for heating and air conditioning systems in 2010. Those credits have been reduced, but you can still see some tax benefit if you are considering an upgrade in your heating and cooling systems. Now is the time to think about installing new air conditioning or an air-source heat pump.

Here’s what you need to know about the federal tax credits for these types of equipment:

■The credit is good for 10 percent of the cost up to $500, or a specified amount between $50 and $300. Action Air can help you determine which models qualify.

■The equipment must be purchased and installed before the end of 2011.

■The tax credit can only be claimed for your principal residence and the equipment must be installed in an existing home.

■Second homes, rental properties, and new construction are not eligible.

Air source heat pumps are an energy-efficient home comfort solution that provides both heating and cooling.They work by moving heat, rather than generating heat, so they consume much less energy than a furnace or conventional air conditioner. The professionals at Action Air have years of experience installing air source heat pumps in northeast Florida, so we know which models work best for different situations.

If you are looking to install a new central air conditioning system, we can help you with that, too. There are countless numbers of models available, but not all of them are eligible for federal tax credits. The best way to determine the right unit for your home is to work with a professional to make sure the equipment you purchase is not too large or too small for your home comfort needs. Contact us at Action Air to learn more about which energy-efficient air conditioners are available.

Schedule time with us now
, before your home gets hot and uncomfortable, and you will not miss out on this year’s federal tax credits.

Sunday, April 10, 2011

The Value of Quality Installation & Maintenance



These days the internet has become a very valuable tool for price comparing when considering purchases, especially major purchases. Everyone uses it. However, if you are considering a new heating and cooling system you need to consider more than just what the best price is and who carries the top brand. The largest factors when buying a heating and cooling system are the installation and maintenance.




Industry research shows that 90% of the value you receive is tied directly to installation and maintenance. The evaluation, installation and maintenance of your system have a greater impact on your wallet and overall comfort than the equipment itself! It is important to make sure it is installed properly, by a reputable company, and maintained to keep it working properly long after you buy it.














A properly installed heating and cooling system starts with a qualified technician performing a load calculation on your home prior to system selection. This calculation is necessary to insure that you get the correct size system to meet the needs of your home. A unit that is too big (oversized) may have a higher upfront cost, raise your utility costs, remove less humidity and fail more quickly. A unit that is too small will have to work harder to heat and cool your home and will most likely fail prematurely as well. A load calculation takes into consideration factors such as, the square footage of usable space in your home, the number of windows, types of windows, insulation amounts, the direction your home is facing and along with many other factors.


Another major factor in insuring that your system in installed correctly is to hire a reputable, trained technician. A professional service technician will know that your ducts need to be checked before installing a new HVAC system. If the ducts are too small they will cause your HVAC system to use more energy and will deliver less comfort. Too small of ducts will lead to early equipment failure as well. A trained technician will also know to measure and document your airflow, to measure refrigerant charge, to ensure that your unit is safe electrically, to test the firing rate on a new furnace or boiler and to test your thermostat to ensure it is compatible with the new equipment.


By choosing a reputable HVAC company for installation they should be able to provide you with a copy of the installation checklist with a record of all measurements taken during installation, as well as provide a copy of the owner’s manual, manufacturer’s warranty and their warranty. Along with this you should get a list of recommended maintenance requirements. Maintenance is key to keeping your system working at peak performance. Many people don’t think that they need to maintain newly installed equipment. Not only is this necessary to keep your warranty in effect (most equipment manufacturers will state in the terms of their warranty that an annual maintenance must be performed by a qualified technician), but also to assure that your new equipment is operating safely and at its peak efficiency.

There is nothing better for your heating and/or air conditioning system than annual maintenance. Annual maintenance allows your system to continue to work at peak efficiency year in and year out. A system that is maintained annually experiences considerably fewer breakdowns and costly repairs along with using less energy. You’ll enjoy the peace of mind in knowing that your system is saving you money on your utility bills every time it comes on. In some instances, the energy savings are enough to pay the cost of the planned annual maintenance service.


So, when you’re in the market for a major purchase like a new heating & cooling system to maximize your home comfort do your research and pick a reputable, experienced HVAC company. Leave the internet to products that do not rely on the value of installation and maintenance!

Saturday, April 2, 2011

Warranties vs. Maintenance

In the HVAC (heating, cooling & ventilation) industry, we often hear the comments, ”We don’t need planned maintenance, we’re still under warranty.” Nothing could be further from the truth!

Manufacturers, to help compensate for problems caused by manufacturing defects, provide warranties on new equipment. If a piece of equipment fails during the warranty period and if the manufacturer accepts that the failure was not caused by outside influence (through improper use or lack of routine maintenance procedures), then they will generally provide a replacement part, free of charge. Equipment manufacturers don’t typically cover labor and the necessary materials needed to replace a failed/ broken part, however, at Action Air, we cover parts and labor for the first year on all repairs made and all systems we install.

In some cases, if a manufacturer determines that a lack of routine maintenance has contributed to the failure of equipment then the warranty coverage can be revoked leaving the homeowner to accept the full cost of repair.

Planned Maintenance inspections are important to not only keep your warranty valid, but also to keep your heating & cooling system working efficiently and safely. Most of us think that after we’ve bought our heating and cooling system, we’re done. We put out the money to pay for this expensive equipment (the most expensive equipment in most homes!) and we expect it to work, without any more effort.

I doubt that any of us would think the same of our cars. We know that our cars require regular maintenance if we want them to keep performing day after day. If you were to stop all maintenance on your car it would eventually seize up and quit working. The same applies to your heating and cooling system, which without regular maintenance will eventually breakdown or fail in approximately 2-3 years. After spending a bunch of money on a HVAC system no one wants to turn around and have to shell out this same money 2-3 years down the road. Your heating and cooling equipment, like your car requires regular maintenance.

Looking back at our records, we were able to determine that 50% of our repair calls could have been avoided by regular maintenance. By having a yearly tune-up on your system, you can avoid much more expensive repairs.

During a typical tune-up, your technician will have a long list of checks that they perform on your heating & cooling system. These checks enable the technician to catch things like a loose electrical connection or parts with visible wear. These problems caught at the time of a tune-up can easily be fixed and will help avoid costly repairs later.

Lack of maintenance will lead to dirt and dust build-up in your system as well. According to Energy Star, a division of the EPA, “Dirt and neglect are the #1 causes of heating and cooling system failure.” This build-up will cause your system to run harder and longer and greatly decreases its efficiency. As your system works harder to beat the heat or cold, your monthly utility bills will increase.

Lack of maintenance on your heating & cooling system can also lead to safety issues. During a tune-up all of the electrical connections are examined, and the unit disconnect switch along with all of the safety devices are checked. If you do not have your system checked out annually you could be running a serious safety risk and not even be aware of it.

As with our cars, we realize that if we don’t do regular maintenance, like oil changes and tune-ups, we will void our warranties. If something major goes wrong with our car we won’t be able to go into the dealership and have it fixed under warranty. Well, the same goes for your heating and cooling system. Most appliances have a 5-10 year warranty, and if you don’t maintain the equipment and something goes wrong, you’re out of luck and the warranty will be void. You’ll end up spending a large amount of money to fix it or even replace equipment that would have been covered under warranty, had you kept up with maintenance.

A lack of maintenance leads to repairs and early equipment failure, inefficiency, higher utility bills and an overall decrease in the system’s ability to keep your home comfortable, not to mention, invalidating your warranty and creating an unsafe environment in your home. When you look at all of this, the cost of a yearly tune-up is cheap in comparison!

Our goal is to help educate our customers about energy and home comfort issues (specific to HVAC systems).For more information about Indoor Air Quality and other HVAC topics,click here to visit our website.

Friday, April 1, 2011

Why You Shouldn’t “Super” Size Your New Heating & Cooling

Don’t pay too much for Your Heating & Cooling System

If you are in the market to replace older, inefficient heating and cooling system with new energy efficient ones, an understanding of the critical importance of sizing the system correctly is needed. The correct size of heating and cooling equipment in your home will improve your comfort while reducing costs, maintenance and energy usage.

To give you some history, homes were not as tightly constructed in the past as they are today and it was not uncommon to install furnaces and air conditioners that were two to four times the necessary capacity. Now most people have added new windows, caulking, weather-stripping, and insulation to their homes. Making improvements such as these to reduce heat loss in the winter and heat gain in the summer allows you to install a much smaller system while still being comfortable and saving on your monthly utility bills.

The most common mistake made in new heating and cooling systems is oversizing. This will make the new system not only more expensive to buy and install, but also forces it to operate inefficiently. An oversized system will also breakdown more often and cost more to operate. Oversized heating equipment creates uncomfortable and large temperature swings. Oversized air conditioners (and heat pumps) do not run long enough to dehumidify the air, which results in the air feeling “clammy” and the potential for unhealthy mold growth in your home.

Oversized equipment experiences frequent starts and stops (known as “short cycling”) will accelerate the wear and tear on the equipment, which can lead to premature failure. Oversized equipment also uses more fan power for the blower, which often leads to duct leakage due to higher operating duct pressures.

On the other side, undersized equipment, with airflow that is too low, can reduce the efficiency of the air distribution and accelerate wear on the system components, leading to earlier failure. Basically, your system will be working longer and harder to keep up with your comfort demands. Your system will have to run constantly and will wear itself out at a quicker rate.

A home “load calculation” is critical when homeowners are looking for a new heating and cooling system. This is basically a list of factors that determine what size system you need. A good contractor/technician will look at things such as, wall measurements, floor space, windows, R-value of home’s insulation, overall square footage of livable space, etc. A close estimate of a building’s air leakage is also necessary. This estimate should also include an inspection of the size, condition of seals on joints and insulation and location of distribution ducts in a forced air system.

Beware of a contractor/technician who only checks the “nameplate” (the label listing BTU’s) of the existing unit and tries to sell you one just like it or even worse, one that’s larger. This is not the correct way to size equipment and is not in your best interest. Another method includes using simple “rule of thumb”. They may base the size of your home on similar homes like it, using a chart that takes into account a variety of factors. This method can be used for a first estimate, but should not be used to size the actual system. You should include a requirement to produce a written sizing calculation when negotiating with your heating and cooling contractor/technician.

So remember when you are looking to buy a new heating and/or cooling system correctly sizing of your system will directly affect the comfort level in your home, as well as the long-term life of the system and overall cost to you. Pick the right size and skip the super-size!

Sources: http://www.energy.gov/ http://www.energystar.gov/ http://www.hgtvpro.com/ http://www.energysavers.gov/